It will cool and heat an area of approx 5m x 6m with ease. If you would like a paipework kit supplied too (3 to 10m) then please message me and i can make up a bundle price for you (If you need outdoor brackets, Rubber feet, condensate pump kit etc etc then we can help too). The system will need installing professionally by a F-Gas registered Engineer. We can install this system too but only within 25 Miles of Paddock Wood, Kent.
Refrigerant Charge: This system is pre-charged with the factory charge of R410a Refrigerant and will be suitable for a pipework run from 3m to 10m. For this system the pipework kit is 1/4 and 1/2 Pipework. You are welcome to collect a system from the office (Below) and other bits and pieces too.....Power supply: A 16amp to the outdoor unit. THIS is not the cheapest of systems BUT it is one of the best on the market and very efficient. Subsequently the installation of this item can only be performed by a qualified F-Gas engineer. We maintain records of all sales of any of our equipment and evidence should be provided to us that installation of same is performed by a suitably qualified Engineer holding current'F-Gas' certification. We - as part of'Chillmech Ltd' hold our own F-Gas Certification which we are happy to provide at any time.
Collection possible but you will obviously need a van. We can often resolve this very quickly with you.