Coli bacteria Staphylococcus aureus bacteria Sterilization at 57°C The heat exchanger maintains a high temperature of 57°C for an appropriate period of time to ensure the best sterilization effect, eliminating microorganisms, bacteria, and viruses. Night Mode When this function is active, the air conditioner operates according to a set temperature curve. Once activated, during the first two hours of operation in cooling mode, it increases the set temperature by 1°C per hour (in heating mode, it decreases the temperature at the same rate). For the next 5 hours, it maintains the reached temperature at a constant level, after which the air conditioner turns off.
Dehumidification Mode In dehumidification mode, the air conditioner lowers the humidity level in the room to an optimal value, automatically adjusting the temperature and airflow rate to achieve the best conditions for drying. This prevents the development of various air contaminants. 8°C Heating Mode Maintains a constant temperature of +8°C in heating mode, which prevents the room from cooling down and provides suitable conditions for pets and plants. 4D Airflow The air louvers of the indoor unit move automatically in both vertical and horizontal planes, distributing conditioned air in all directions (simultaneous vertical and horizontal swing). Smart Defrosting The air conditioner activates defrost mode only when necessary and solely for the time needed to defrost the heat exchanger, allowing near-continuous operation of the device in heating mode. The smart defrosting system improves energy efficiency by 5% and increases heating efficiency by up to 20% in low outdoor temperatures. The Q-Smart Eco model is equipped with a Wi-Fi 2.0 module that plugs into the air conditioner via a USB port. This easy-to-install solution allows you to control the device's operating parameters using mobile devices, even when you are away from home or the office where the air conditioner is installed.To control the air conditioner via a Wi-Fi network, it is necessary to install the AC Freedom application on your mobile device. The application allows you to control multiple devices and save individual parameters for each of them, such as operating mode, temperature settings, and fan speed level. The friendly and easy-to-use application interface ensures maximum convenience in controlling the device. The surface of the heat exchangers in the indoor and outdoor units has been covered with a unique, golden coating that effectively prevents the growth of bacteria and helps increase the heating efficiency of the devices.
It is also more resistant to oxidation and corrosion than the standard blue coating, thereby extending the lifespan of the device even further. Cooling capacity: 2.70 kW (0.6 - 3.8)? Heating capacity: 3.00 kW (0.8 - 4.2)?
SEER / SCOP: 6.2 / 4.0? Energy class cooling / heating: A++ / A+? Sound pressure level (indoor unit): 24 - 44 dB(A)?
Sound pressure level (outdoor unit): 51 dB(A)? Indoor unit dimensions (mm): 761×296×199? Outdoor unit dimensions (mm): 708 x 280 x 530? Indoor unit weight: 7.3 kg? Outdoor unit weight: 21.5 kg?
Operating temperature range (outdoor): cooling: -15 49°C, heating: -15 32°C? Control: Wireless remote control / Mobile application (Wi-Fi).