If you need additional details for this system then search on google for -'Daikintech FAQ100C' there will be a couple of PDF files which show all dimesions etc. The system will ideally need installing professionally by a F-Gas registered Engineer but i can supply pipework kits for additional cost, please message me if pipework is needed etc. Installing these is not easy and you will need vac pump and pressure testing equipment.
We can install this system too but only within 25 Miles of Paddock Wood, Kent. This will cool or heat an area of about 50 - 60M2 fairly easily. Refrigerant Charge: This system is pre-charged with the factory charge of 4Kg plus and extra 1.4 Kg so will be suitable for a pipework run of around 40 to 50m if need be. Pipework needed will be 5/8 and 3/8 plus a 1.5mm 4 core interconnection cable. 2 x 1.0mm core cable for the remote controller to indoor unit.Power supply: A 16amp 3ph 400v with Neutra tot he outdoor unit needed, it actually draws about 5 to 7 amps when running flat out. THIS IS A GOOD SYSTEM, WORKS REALLY WELL... IVE SEEN IT WORKING AT FULL TILT.
Collection possible but you will need a van (for the outdoor unit). The item "Daikin Air Conditioning System 10Kw Wall Mounted FAQ100C 2016 3Ph 400v RZQG100L" is in sale since Saturday, June 22, 2019. This item is in the category "Home, Furniture & DIY\Heating, Cooling & Air\Air Conditioners & Heaters\Central Air Conditioners".The seller is "coolingspares-uk" and is located in Tonbridge. This item can be shipped to all countries in Europe.