Message me if you need anything in particular. We have 3.5Kw unit, 5Kw units and some larger 7 and 10Kw wall mounted systems available. This Listing is for a'NEW' Daikin 2Kw (7000 Btu/hr) Wall mounted Inverter'Heat Pump' FTXA20BS (Silver Casing Colour) with a matching outdoor unit RXA20A (This is a R32 System and new), these are ideal for bedrooms, man-cave, garden office, home office, home gym. Seasonal Efficiency (EN14825) Cooling Energy Label.
Seasonal Efficiency (EN14825) Heating Energy Label. Nominal Efficiency - EER / COP. 4.57 / 5.00. Air Flow Rate (Cooling) High / Nom / Low / Silent m3/sec.
0.183 / 0.136 / 0.101 / 0.076. Dimensions - Height x Width x Depth (mm). 295 x 798 x 189.
Sound Pressure (Cooling) High / Nom / Low / Silent dbA. 39 / 32 / 25 / 19. Dimensions Height x Width x Depth mm.
550 x 765 x 285. Interconnecting Cable (Core / Cable Size). Pipe Sizes Liquid / Gas (Inches / mm).
1/4 (6.5) / 3/8 (9.5). Sound Pressure (Cooling) High dBA. Operating Range (Cooling) Min/Max °CDB.
Operating Range (Heating) Min/Max °CDB. The system will cool and heat an area of approx 12ft x 10ft all OK (3m x 4m). We also have 3.5Kw systems (12000 Btu/hr) inverter Heat Pumps (FTXP35) and complete with the pipework kit these will be. Please message me if you require this system.
The system will need installing professionally by a F-Gas registered Engineer. We can install this system too but only within 25 Miles of Paddock Wood, Kent. BUT we currently have approx 4 weeks delay with Labour - as we are BUSY.... Refrigerant Charge: This system is pre-charged with the factory charge of R32 Refrigerant and will be suitable for a pipework run from 3m to 10m. For this system the pipework kit is 1/4 and 3/8 Pipework.
If you need longer length than 6m then contact me. You are welcome to collect a system from the office (Below) and other bits and pieces too..... Power supply: A 16amp to the outdoor unit.
(Can be run from a 13amp socket outlet as the current draw is only around 4 amps max). THIS is not the cheapest of systems BUT it is one of the best on the market and very efficient. Subsequently the installation of this item can only be performed by a qualified F-Gas engineer. We maintain records of all sales of any of our equipment and evidence should be provided to us that installation of same is performed by a suitably qualified Engineer holding current'F-Gas' certification. We - as part of'Chillmech Ltd' hold our own F-Gas Certification which we are happy to provide at any time. (subject to having a commissioning report provided once installed and running). Collection possible and a car is fine - it will fit into most. We can often resolve this very quickly with you.