Air Conditioning Pipe Kit Piping pipework DIY Copper Refrigeration Flare
Hi Thanks for looking at our shop.. (By all means message our team for custom kit lengths or further details). Note: This listing is for the'Proper' -'Not those cheap Crappy kits that are available online' - Air Con Pipework kit. 2 x Copper pipes i.
E 1/4 & 3/8 etc or as your selection and at the length selected too. The pipes will be insulated with black'Class'O' insulation. Both Ends of the pipes will be fitted with flare nuts and flared, so these will just go onto your unit and seal.
So you have enough to make off ends into each unit. Plus some additional 2 Black tape and approx 20 x cable ties - for strapping up or repairing any insulation damage. For your info : Most 2.5Kw (9000btu) and 3.5Kw (12000 btu) ac systems use 1/4 and 3/8 pipework. Most systems of 5 or 6Kw will use 1/4 and 1/2 pipework. Systems above 6Kw tend to use 3/8 and 5/8 pipework.If you need me to check or confirm for you please message me your intended make / model number and i will find out for you.... We have all the tools and materials in our workshop in Kent (Paddock Wood) to make up any length of 1/4", 3/8, 1/2", 5/8" or 3/4" Copper (Refrigeration Quality) pipework. If the Length or size of pipes you need is not listed please message us and we will endeavour to get back to you asap with a price / availability.
Please note: That we will require a day or two to make up these for you. Although sometimes we have sets ready to go same day.
We Can also supply the following: (Message for actual costs at any time). Basically anything else you require to have a split type air conditioning unit installed.The installation should be carried out by a certified F-Gas engineer, but you know that! PS: If you are also looking for a quality AC system then we have available in our stores at least 10 systems. (2.5kw and 3.5Kw) of DAIKIN Wall and Ceiling Mounted inverter'Heat Pump' split systems (Brand New Boxed) Please message me. For prices BUT these are not your basic models found online, these actually work after 3 years of service!!! Unlike loads of others, but they wont be as cheap.
The installation of air conditioning, refrigeration and heat pump pipe work (including split systems), should only be completed by qualified staff holding the necessary'F-gas qualifications' and certificate. I do not encourage the use of DIY installations at all!! As the gas pressures, environmental and'health and safety' issues are complicated and dangerous if not adhered to correctly. R32 / R410a refrigerant and alike all operates at very high pressures and you can easily damage yourself and possibly others too..